Recently ,The Technical Master Li from Ningbo Dongfang Die-casting Machine Tool Co.,Ltd and our cooperator Mold Master Sun went to Bangladesh To Debugging Die Casting Machine together.
The Clients from Bangladesh have bought one set of cold chamber die casting machine and they also have bought lock body &lock cylinder moulds from us before.And it took about one month to finish the goods .Before delivering the die casting machine to our clients ,our tech master will detect and debug the casting machines , and make sure that everything is ok then we ship it to the customers .
Generally,the cold chamber aluminum die casting machine can be occur to the following malfunction:
Oil pump can't be started
Press the oil pump start button ,but the thermal relay thip
No total pressure, no automatic, no mold adjustment
No action, no mold clamping, no low pressure clamping,no high pressure clamping
No thimble, no shot action, cylinder leak, computer malfunction etc .
So once the pressure die casting machine has a precursor to failure, it must be highly valued.The operator should observe calmly, determine the location of the fault and the possible causes, and determine a feasible repair method.The operator must be reminded that it must be carried out in accordance with the requirements, and do not operate in violation of the rules, so as not to cause a bigger accident.
